Anyone who does not know about Viper4android should know that it is an amazing audio equalizer. Not only does it augment the audio quality of your phone but it also is one of the most influential equalizers for android. No matter how expensive your smartphone is, unless you do not have a wonderful quality for audio, it is of no use.
Viper for Android was basically founded by Viper520 and co-founded by Mr. ZhuHang and if it would not have been them, we would have never been able to enjoy the audio in Smartphones with such an incredible equalizer.
There are two ways to install Viper4android. Either you install if you have the custom recovery set in your phone or you install without it. With both, it will work. If you ask me, I would prefer installing it via custom recovery because that makes it easier to install. Not only does flashing the files become simpler but at the same time the results received for Viper for Android for also preeminent.
- 1 Viper For Android 2018
- 2 How To Install Viper4Android?
- 2.1 Download Viper4Android
- 2.2 Transfer Apk To Your Android
- 2.3 Enable Unknown Sources
- 2.4 Install Viper4Android Apk
- 2.5 Open Viper4Android FX
- 2.6 Install V4A Driver
- 2.7 Grant Access
- 2.8 Reboot The Device After Driver Installation
- 2.9 Launch The Application
- 2.10 Check Driver Status
- 2.11 Use Viper4Android Application
Viper For Android 2018
All you need to install this in a rooted Android device. With a rooted Android device, you can install Viper4android normally or via the zip file. Well till I know about it, this app has many settings which you can use as per your customization and these settings are available in Sound Mod. Dolby Atmos also provide this but the choice for settings is not that great. Through the Sound Mod, you can adjust the settings by yourself by clicking on the link of XDA forums provided below.
Further in this article, I will provide you with steps which will assist you in downloading Viper for Android that too without the custom recovery.
Note: There are chances of your Android device becoming inefficacious or becoming soft-bricked after the installation of mods. I would like to elucidate from before that Qd Tricks will not be responsible for it. Also, easy recovery is possible and we can unquestionably assist you with that.
Things To Remember Before The Installation Of Viper4Android
- You can install only one audio mod at a time. In case if there are other Mods already installed than they have to removed before the installation.
- Check if your phone is rooted or not because Viper for Android does not work without rooted phones. Check this link to know more about how root any android phone without pc.
- To install this app, you need to have a Busybox on your Rom. You can find it in the app box provided below. There are many other installers available for these drivers. You can choose the one you find suitable.
- There might be chances of the failure of the drivers. When such a case, you would require the SELinux status to be set as permissive and this can be done with the SELinuxModeChanger.
- Viper DDC and Spectrum Extension – V4A effects
- Added AnalogX
- USB/Dock audio output support
- Channel Pan – change left/right channel output
- Differential Sound/Haas Effect
- ViPER Fidelity Control
- Virtual Headphone Surround+
- Speaker optimizations
- Convolver, to load IRS modules for various effects
- Cure Tech+
- Spectrum Extension
- USB/Dock effect Support
- ViPER Fidelity Control
- Auditory System Protection
- FX Compatible Mode
- x86 and Octa-Core device support
Check this link to know more about ViPER4Android FX
- Version: FX version 126.96.36.199
- Codename: Beautiful
- Compiled date: February 7,2016 – Official Release
- Operating environment: Android 2.3 / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 5.0 / 6.0
- CPU platforms: ARM (ARM11 or higher), x86(Atom/i3/i5/i7)
- Language: English (US) / Simp. Chinese / Trad. Chinese / more
How To Install Viper4Android?
Transfer Apk To Your Android
Transfer the downloaded ViPER4Android_FX_v2401_A4.x-A6.x.apk to your Android Device.
Enable Unknown Sources
Enable the unknown sources of your device from the Security option in your settings if it is not already enabled.
Install Viper4Android Apk
Install the apk file manually from the file manager.
Open Viper4Android FX
After installation, go to the Viper4Android FX from the app drawer.
Install V4A Driver
After opening it for the first time, you will be asked to install the drivers for the app. You need to click on Yes.
After that it will ask you for your permission. Agree to give the permission.
Reboot The Device After Driver Installation
As the app auto-installs itself and its drivers, you only need to check that it has been installed properly or not. If it has completed successfully, it will ask you to reboot your device. Please follow the instructions.
Launch The Application
Launch the ViPER4Android FX app after the reboot.
Check Driver Status
Check if the driver status is normal but clicking on the menu button at the top right corner of the app. In case of any type of failure of installation, you need to check the Prerequisites of the app installation.
Use Viper4Android Application
Your V4A app is installed. Adjust the setting according to your device and the specific profiles of your device. If you have followed the steps properly you will definitely be able to install Viper for Android in no time.
I hope the installation process of the app is very simple and easy for you to understand. In case of any queries, doubts or questions, please feel free to ask us anything about Viper for Android in the comment box below. We will do the best we can do to help you and give you feedback as well.
I would recommend you to bookmark this page and keep visiting us for more information on Viper4Android, tips and information about the app. I hope this article has been expedient for you and it has helped you finish the entire viper4android installation process.